19
3.22
Connecting toothed-belt lock (optional) and controller
1. Attach cable of toothed-belt lock (Id. No. 105310) (1) to the controller (2).
2. Lay cable for toothed-belt lock, shorten if necessary, strip and attach insulated
wire-end ferrules.
3. Connect cable to toothed-belt lock (3) (see terminal connection diagram).
4. Place cover (4) on controller and lock in place. The holding strength of the cover
can be increased by slightly bending the cover.
1
2
1
3
4
Cables must not be pinched when mounting the cover.
