Gestetner A265, Service Manual

Page: 555 / 855

AUTOMATIC SERVICE CALLS
SM 2-1 A265/A256
Det
a
iled
De
s
c
ri
ptions
A8
9
5
2. DETAILED SECTION DESCRIPTIONS
2.1 AUTOMATIC SERVICE CALLS
2.1.1 SERVICE CALL CONDITIONS
The fax unit makes an automatic service call when the base copier’s BiCU
generates any SC code except for those stored in the following RAM.
NOTE: The service station’s fax number has to be programmed in advance, or the
machine cannot make a service call.
Exceptions
Address (H) Definition Default SC code
680DC8 1st SC code - High byte (BCD) 01
680DC9 1st SC code - Low byte (BCD) 92
192
Automatic SBU adjustment
error
680DCA 2nd SC code - High byte (BCD) 09
680DCB 2nd SC code - Low byte (BCD) 80
980
Program loading error
680DCC 3rd SC code - High byte (BCD) 09
680DCD 3rd SC code - Low byte (BCD) 99
999
Program version error
680DCE
to
680DEF
4th SC code - High byte (BCD)
to
20th SC code - Low byte (BCD)
FF(H)
Not Programmed
To add additional SC codes, program them in the blank addresses.
Wild Cards
This function allows “A” or “a”, to be used as a wild card instead of numbers from 0
to 9. For example, “1AA” or “1aa” means all the SC codes from 100 to 199, and
“39A” or “39a” means all the SC codes from 390 to 399.
The fax unit cannot make an automatic service call when a Fax SC code condition
has occurred. Refer to the Troubleshooting section for Fax SC code details.
Manual Service Call
If the service station needs a report, the user can make a service call manually, by
changing bit 7 of User Parameter 14 (0E) to “1”.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA