Gestetner A265, Service Manual

Page: 233 / 855

SERVICE PROGRAM MODE
SM 4-45 A265/A267
Serv
ic
e
Ta
b
le
s
Mode No.
Class
1 and 2
Class
3
Function Settings
5-504*
Jam Alarm Setting This SP is for Japan only. Do not change
the value. 0 ~ 255
100 copies
/step
40
5-505*
Error Alarm Setting
This SP is for Japan only. Do not change
the value.
0 ~ 255
100 copies
/step
10
1
Consumable Alarm
(Paper) 0: No
1: Yes
2
Consumable Alarm
(Staple) 0: No
1: Yes
5-507*
3
Consumable Alarm
(Toner)
This SP is for Japan only. Do not change
the value.
0: No
1: Yes
1
CE Call (Jam Level
1)
2
CE Call (Jam Level
2) 5-508*
3 CE Call (Door Open)
This SP is for Japan only. Do not change
the value.
Resets all software counters. Also, returns
all modes and adjustments to the default
settings (except for the machine serial
number, SP5-811).
After selecting “1”, press the “Original Type”
key and the
)
key at the same time to clear
the memory.
If the reset was successful, the beeper will
sound 5 times. If it failed, the beeper will
sound only twice.
See the “Memory All Clear” section 4.2.9 for
how to use this SP mode correctly.
5-801
Memory All Clear
Normally, this SP mode should not be
used.
It is used only after replacing the NVRAM or
when the copier malfunctions due to a
damaged NVRAM.
0: No
1: Yes
Performs a free run for both the scanner and
the printer.
5-802
Free Run
After selecting “1”, press “OK” or the
(
key
twice to start this feature. Press the
&
(Clear/Stop) key to stop.
0: No
1: Yes
Displays signals received from sensors and
switches.
5-803
Input Check
Press the
"
(Clear Modes) key to exit the
program. See the “Input Check” section
4.2.4 for details.
Turns on electrical components individually
for test purposes.
5-804
Output Check
See the “Output Check” section 4.2.5 for
details.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA