Gestetner A265, Service Manual

Page: 731 / 855

ERROR CODES
SM 7-9 A265/A267
T
rouble
-
s
hooting
A8
9
5
Code Meaning Suggested Cause/Action
9-40 CRC error during PC fax
communication
9-41 Third failure during PC fax
communication
9-42 DCN received
unexpectedly during PC
fax communication
9-43 Frame received
unexpectedly during PC
fax communication
9-44 Response time over during
PC fax communication
9-45 Frame transmission error
during PC fax
communication
•
Check the serial interface and cable
connection between the PC.
•
Replace the DIU (PCFE board) or FCU.
9-61 Memory overflow occurs
during reception Check the SAF.
22-00 Original length exceeded
the maximum scan length
•
Divide the original into more than one page.
•
Check the resolution used for scanning. Lower
the scan resolution if possible.
•
Add optional page memory.
22-01 Memory overflow while
receiving
•
Wait for the files in the queue to be sent.
•
Delete unnecessary files from memory.
•
Transfer the substitute reception files to an
another fax machine, if the machine’s printer is
busy or out of order.
•
Add an optional SAF memory card or hard
disk.
22-02 Tx or rx job stalled due to
line disconnection at the
other end
•
The job started normally but did not finish
normally; data may or may not have been
received fully.
•
Restart the machine.
22-04 The machine cannot store
received data in the SAF
•
Update the ROM
•
Replace the FCU.
23-00 Data read timeout during
construction
•
Restart the machine.
•
Replace the FCU
25-00 The machine software
resets itself after a fatal
transmission error occurred
•
Update the ROM
•
Replace the FCU.
F0-xx V.34 modem error
•
Replace the FCU.
F6-8x SG3-V34 modem error
•
Update the SG3-V34 modem ROM.
•
Replace the SG3-V34 board.
•
Check for line noise or other line problems.
•
Try communicating another V.8/V.34 fax.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA