Administrator Mode
4
4.7.7 SNMP Setting
The Simple Network Management Protocol (SNMP) allows you to monitor the status of the
camera through SNMP network management software. Note this function is available for
GV-VS04H
(Firmware Version 1.05 or later),
GV-VS11
,
GV-VS12
(Firmware Version 1.05
or later) and
GV-VS14
.
Figure 4-37
1. Select
Enable SNMPv1 SNMPv2c
to enable the function.
2. To enable access to
Read/Write Name
, type a name string. This will serve as a
password to allow read and write access
to the camera from the SNMP software
.
3. To enable
Read only
Name, type a name string to allow read-only access to the
camera from the SNMP software.
4. For a more secured connection, select
Enable SNMPv3
to enable SNMP version 3.
5. To enable access to SNMPv3
Read/write Name
, type a name string.
6. Select an
Authentication Type
to use for SNMP requests.
7. Type the
Authentication Password
and
Current password (Encrypted)
. You will
need to type these passwords in the SNMP software to be able to access the camera.
8. To enable access to SNMPv3 Read only name, follow steps 5 to 7.
9. Click
Apply
to save the settings.
87