manualshive.com logo in svg

GeoVision GV-VS11, User Manual, Page: 81 / 185

Share
Download
GeoVision GV-VS11 User Manual Download Page 81

 

Administrator Mode

 

4

4.5  Recording Schedule  

The schedule is provided to activate recording and I/O monitoring on a specific time each 
day. 

4.5.1  Recording Schedule Settings 

You can set up different monitoring schedules for each camera. 

 

                                                      

  

 Figure 4-29 

„

 

Span 1- Span 3: 

Set a different recording mode for each time frame during the day. 

Each day can be divided into 3 time frames, represented by Span 1 to Span 3. The 
time frame settings will work from Monday through Sunday.  

„

 

Weekend:

 Enable this option to have a whole-day monitoring on the weekend and 

select a recording mode to be used. Define whether your weekend includes 

Saturday 

and Sunday

 or 

Only Sunday

. 

„

 

Special Day:

 Set the recording mode on a specified day. 

 

Note:

 In Recording Schedule and I/O Monitoring Schedule, if the settings for Special 

Day conflict with those for Span 1-3 or Weekend, the Special Day settings will get 
priority.

 

 

73

Summary of Contents for GV-VS11


























































































































































































Reviews:

No comments