Administrator Mode
85
4
4.7.7 SNMP Setting
Note this function is available for
GV-VS04A
(Firmware Version 1.05 or later),
GV-VS04H
(Firmware Version 1.05 or later),
GV-VS11
, and
GV-VS12
(Firmware Version 1.05 or later).
The Simple Network Management Protocol (SNMP) allows you to monitor the status of the
camera through SNMP network management software.
Figure 4-37
1. Select
Enable SNMPv1 SNMPv2c
to enable the function.
2. To enable access to
Read/Write community
, type a community string. This will serve
as a password to allow read and write access
to the camera from the SNMP
software
.
3. To enable
Read only community
, type a community string to allow read-only access
to the camera from the SNMP software.
4. For a more secured connection, select
Enable SNMPv3
to enable SNMP version 3.
5. To enable access to SNMPv3
Read/write community
, type a community string.
6. Select an
Authentication Type
to use for SNMP requests.
7. Type the
Authentication Password
and
Encryption Password
. You will need to type
these passwords in the SNMP software to be able to access the camera.
8. To enable access to SNMPv3 Read only community, follow steps 5 to 7.
9. Click
Apply
to save the settings.
