manualshive.com logo in svg

GeoVision GV-CMS Series, User Manual

Share
Download
GeoVision GV-CMS Series User Manual Download Page 32

 

 

22 

[Other] 

„

 

Allow Center V2 to Get System Information:

 Allows Center V2 to 

get system information on your GV-System. 

„

 

Send Alert Message of POS’s Loss Prevention to Center V2:

   

Notifies Center V2 about the events of POS Loss Prevention.

 

„

 

Time synchronization with Center V2:

 Enables the time 

increment/decrement of minutes and seconds at the subscriber site to 
match the time at the Center V2.   

„

 

Notify Center V2 when the storage space was full: 

Notifies the 

Center V2 when the subscriber’s storage space is insufficient. 

„

 

Notify Center V2 when Wiegand Event occurs:

 This option is 

designed for the access control application with GV-Wiegand Capture. 
When the GV-System receives the card number from GV-Wiegand 
Catpure, the number can also be sent to the Center V2.   

 

Note: 

When 

Time synchronization with Center V2 

is selected, the 

function of time synchronization will be activated as soon as the Center 
V2 is started up, and it will be re-activated every 12 hours. 

 

Summary of Contents for GV-CMS Series


































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands