GeoVision GV-CMS Series User Manual Download Page 279

Page: 279 / 321

268

Popping Up Live Video upon Input Trigger

You can be alerted by a pop-up live video after an input device is triggered.
Up to 16 live videos can be accessed simultaneously.

On the toolbar, click the

Configure

button (No.1, Figure 4-62), select

Panel Setting

and click the

Notify

tab. This dialog box appears.

Figure 4-78

2. Specify

the

Maximum Number of Invoked Camera

Views

that can

pup up at the same time when inputs are triggered. Note that the
maximum number of popup videos is 16.

3. Select

Enable digital input to invoke the associated camera

activate the function.

Summary of Contents for GV-CMS Series


































































































































































































































































































































Search results

Summary of Contents for GV-CMS Series

Reviews:

Brands by name

Popular brands

GeoVision GV-CMS Series, User Manual

Search results

Summary of Contents for GV-CMS Series

Reviews:

Brands by name

Popular brands