GeoVision GV-CMS Series User Manual Download Page 234

Page: 234 / 321

Control Center

223

frequency for all camera views on the
monitor square.

•

Clear all set monitors’ position:

Clears

the IP Matrix view every time when you
modify the screen division.

4 Set

Channel

Focus on one monitor view, click this icon,
and select one group for display.

5 Matrix

Configure

Focus on one monitor view, click this icon,
and set caption display, camera scan interval,
DirectX and PTZ control method.

Start / Stop Scan

Focus on one monitor view, click this icon,
and select to start or stop the camera scan
function.

7 Set

Quad

Focus on one monitor view, click this icon,
and set the screen division.

Page Up &
Page Down

Focus on one monitor view, and click one of
these icons to scroll the page up and down.

9 Monitor

Square

Displays the monitor views. Right-click one
monitor view to have these settings:

•

Set Channel:

Select a group for display.

•

Advanced Control:

Enlarges the monitor

view for further management.

•

Remove Monitor:

Removes the monitor

view from the monitor square.

10 Monitor

Icon

The icons of connected monitors. Right-click
one icon to have the setting:

•

Identify Monitor:

Displays a large number

on the monitor square, showing which
monitor square corresponds with which
monitor icon.

Also see

IP Matrix Settings

4.22 System Configuration

Summary of Contents for GV-CMS Series


































































































































































































































































































































Search results

Summary of Contents for GV-CMS Series

Reviews:

Brands by name

Popular brands

GeoVision GV-CMS Series, User Manual

Search results

Summary of Contents for GV-CMS Series

Reviews:

Brands by name

Popular brands