manualshive.com logo in svg

GeoVision GV-CMS Series, User Manual

Share
Download
GeoVision GV-CMS Series User Manual Download Page 221

 

 

210

Advanced Settings 

On the Matrix window, click the 

Configure

 button (No. 5, Figure 4-21).   

 

[System Configure]   

 

                                                Figure 4-22 

„

 

Caption:

 Displays the ID, Location or Camera Name stamp on screen. 

„

 

Camera Scan:

 Sets the rotation interval between cameras. Click the 

Arrow

 button to set rotation mode of 1, 4, 6, 9, 16 or 24 channels. You 

can also enable the automatic scan function at the Matrix startup. 

„

 

DirectX: 

Sets the DirectDraw function.

 

„

 

PTZ Control: 

Select one type of PTZ control panel. For details on PTZ 

Automation, see 

PTZ Automation

, Chapter 6, 

DVR

 

User’s Manual

 on 

the Surveillance System Software DVD.   

„

 

View: 

If video sources or connections tend to be interrupted, or you 

want to prevent the operator from knowing the broken connection, 
select this option and set the duration that the last frame remains on 
the screen to avoid the instant and frequent display of “Video Lost” or 
“Disconnect” messages.   

Summary of Contents for GV-CMS Series


































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands