GeoVision GV-CMS Series User Manual Download Page 160

Page: 160 / 321

Vital Sign Monitor

149

[System Information]

Figure 3-8

[Video/Audio Log]

Notifies the VSM when the duration of the video/audio

logs is less than the specified days.

[Storage Information]

Allow Vital Sign Monitor to inquire the storage information:

Allows

the VSM to inquire the subscriber’s storage information.

Report the total amount of free storage space to Vital Sign
Monitor:

Reports the subscriber’s size of free storage space.

Notify Vital Sign Monitor when the total amount of free space is
lower than xx GB:

Notifies the VSM when the subscriber’s storage

space is insufficient. The space limit is 1 GB at least.

Notify Vital Sign Monitor when the storage space is full:

Notifies

the VSM when the subscriber’s storage space was full.

Notify Vital Sign Monitor when any storage is lost:

Notifies the

VSM when the storage device is lost.

Summary of Contents for GV-CMS Series


































































































































































































































































































































Search results

Summary of Contents for GV-CMS Series

Reviews:

Brands by name

Popular brands

GeoVision GV-CMS Series, User Manual

Search results

Summary of Contents for GV-CMS Series

Reviews:

Brands by name

Popular brands