GeoVision GV-CMS Series User Manual Download Page 258

Page: 258 / 321

Control Center

247

4.18 Panorama View

Spliced from multiple camera images, a panorama view provides a
continuous scene for live monitoring.

Each camera selected for the panorama view will keep the recording in
original format. Up to 4 sets of panorama views can be created.

Note:

This function is only available when the Control Center dongle with

AVP function is used.

To access this feature, on the Group List, right-click the desired group, and
select

Panorama Setting

. The CMS Panorama program is enabled and

minimized to the system tray. The following Panorama Setup dialog box
also appears.

Figure 4-57

Summary of Contents for GV-CMS Series


































































































































































































































































































































Search results

Summary of Contents for GV-CMS Series

Reviews:

Brands by name

Popular brands

GeoVision GV-CMS Series, User Manual

Search results

Summary of Contents for GV-CMS Series

Reviews:

Brands by name

Popular brands