GeoVision GV-CMS Series User Manual Download Page 208

Page: 208 / 321

Control Center

197

4.7 Audio Broadcast

The Control Center operator can use the Audio Broadcast function to speak
to multiple hosts at one time over LAN or the Internet.

Note:

The Audio Broadcast function supports both GV and third-party IP

devices with speaker functions.

Starting the Audio Broadcast

To open the Audio Broadcast window, click the

Broadcast Service

button

on the Host List. This dialog box appears.

Figure 4-16

Drag the desired hosts from the Host List to the Audio Broadcast
window. Or right-click the host and select

Add to Broadcast Service

You can mark or unmark the hosts on the Audio Broadcast window to
enable or disable audio broadcasting to them.

To start audio broadcasting to the hosts, click the

Start/Stop

Broadcasting

button on the Audio Broadcast window, and talk to the

microphone connected to the computer of Control Center.

Summary of Contents for GV-CMS Series


































































































































































































































































































































Search results

Summary of Contents for GV-CMS Series

Reviews:

Brands by name

Popular brands

GeoVision GV-CMS Series, User Manual

Search results

Summary of Contents for GV-CMS Series

Reviews:

Brands by name

Popular brands