manualshive.com logo in svg

GeoVision GV-CMS Series, User Manual

Share
Download
GeoVision GV-CMS Series User Manual Download Page 164

Vital Sign Monitor 

 

153

3 

[Status] 

Indicates the meanings of icons. 

[Temperature]

 Indicates the temperature of subscriber. This feature is only 

supported in certain models of GV-IP Camera, and GV-System with 
GV-3008 Card. 
 

Note:  

1. 

For the GV-IP Cameras that support temperature display, refer to 
the 

GV-IPCAM H.264 User’s Manual

 for detail.   

2. The 

option 

Send temperature status to Vital Sign Monitor

 must 

be enabled on GV-System with GV-3008 Card. For details, see 

[System Information]

, 

Advanced Settings for Subscription

, 

3.6 

Connection to VSM

.  

 

[I/O Device] 

„

 

Force Output: 

To enable this tab, highlight one output from the tree 

list, and click this tab to force the output at the subscriber site to be 
triggered. For this function to work, the subscriber must grant the 
privilege first. See the 

Allow Vital Sign Monitor to Force Output 

option in Figure 3-7. 

„

 

Enable/Disable I/O: 

Allows the VSM to arm or disarm any I/O devices 

at the subscriber site without interrupting the monitoring.     
For this function to work, the subscriber must grant the privilege first. 
See the 

Allow Vital Sign Monitor to Enable / Disable I/O

 option in 

Figure 3-7. 

Note: 

This function also supports the client GV IP devices of these 

firmware versions: 
GV-Compact DVR: Firmware V1.43 or later   
GV-IP Camera: Firmware V1.05 or later   
GV-Video Server: Firmware V1.45 or later 

 

 

Summary of Contents for GV-CMS Series


































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands