GeoVision GV-CMS Series User Manual Download Page 209

Page: 209 / 321

198

The Audio Broadcast Window

Figure 4-17

The controls on the Audio Broadcast window:

No. Name

Description

Host Name

Displays the host name.

Displays the host IP address.

Status

Displays the connection status of the host.

Change Style Minimizes or enlarges the Audio Broadcast window.

Close Closes

the

Audio Broadcast window.

6 Setup

Always on top:

Always displays the Audio

Broadcast window on top of the screen.

Opacity:

Select the opacity level for the Audio

Broadcast window. The value can range from 20%
(fully transparent) to 100% (fully opaque).

Start/Stop
Broadcasting

Starts or stops audio broadcasting.

Dragging Area

Click the button and drag the Audio Broadcast window to
the desired position.

Summary of Contents for GV-CMS Series


































































































































































































































































































































Search results

Summary of Contents for GV-CMS Series

Reviews:

Brands by name

Popular brands

GeoVision GV-CMS Series, User Manual

Search results

Summary of Contents for GV-CMS Series

Reviews:

Brands by name

Popular brands