Geokon GK-604D, User Manual

Page: 71 / 117

59
4.1 Hole Configuration
Figure 69 depicts the Hole General Settings, the first screen of the Edit Hole
Settings dialog:
-
Hole ID
Read-only value, generated when the hole
was created. Used internally by the GK-
604D IRA.
-
Hole name
Tap on the keyboard icon (bottom of the
screen) to bring up the on-screen
keyboard. Use it to enter a unique and
descriptive hole name.
-
Description
Using the on-screen keyboard, enter a brief
description pertaining to the hole’s location
and purpose.
-
Probe Name
Select the Probe Name from the drop down
list. This associates a hole with a particular
probe.
-
Hole Units
The units for the hole level and interval. Select either meters or feet from the
drop-down list.
-
Created On
Read-only date and time value, generated
when the hole was created.
-
Starting Level
Using the on-screen keyboard, enter a value
for the initial level of the survey for this hole
(see Figure 70).
-
Interval
Enter an interval to be used for the survey.
This value is dependent on Hole Units and is
typically .5 meters or 2 feet.
-
Top Elevation
This is an optional parameter and
corresponds to the elevation at the top of
the hole.
-
Azimuth Angle
This is an optional parameter and allows
correction of any casing deviation from the
appropriate A+ direction.
Figure 69 - Hole General Settings
Figure 70 - Hole Parameters