Geokon GK-604D User Manual Download Page 59

Page: 59 / 117

3.4 File Menu

The file menu is used to import and export Project Explorer element settings along

with data export, viewing and report generation. It also is used to fully delete

and/or restore previous deleted Project Explorer elements (see Figure 46).

Figure 46 - File Menu

Figure 47 - Export Menu

3.4.1 Export Menu

The Export menu is used to export hole data and Project Explorer element

settings to a folder of the user’s choosing (see Figure 47).

3.4.1.1 Export Data Menu

The Export Data menu allows exporting of data from the current hole -

selected either via the Project Explorer or listed in the status area. Figure

48 shows the files available for hole, “Hole1”. A file may be selected by

tapping and holding on the file name. When a context menu is displayed,

tap on “Select” to select the file for exporting. Multiple files may be

selected. Once all the desired files are selected, tap “Export” to display the

Save File window (Figure 49) where a new name and folder may be

specified for each file.

Summary of Contents for GK-604D






















































































































Search results

Summary of Contents for GK-604D

Reviews:

Brands by name

Popular brands

Geokon GK-604D, User Manual

Search results

Summary of Contents for GK-604D

Reviews:

Brands by name

Popular brands