Geokon GK-604D, User Manual

Page: 65 / 117

53
3.4.3 View Data
When the View Data Menu is clicked the screen displayed in Figure 58 is shown.
The Select View Options screen is used to select a view option (see Figure 59)
and data files to view a graphical or tabular report.
Figure 58 - Select View Options Window Figure 59 - View Option List
The available “View” options are:
3.4.3.1 Raw Data File as Table
This selection will cause the selected “hole” raw data to be displayed or
saved in tabular form. Figure 60 shows the available options for any
report. Figure 61 illustrates the report as viewed on the FPC-1 unit. See
Appendix C for examples of reports saved in text form. Tabular reports
may also be saved in comma-separated value (.csv) or “Text” (.txt)
format.
3.4.3.2 Axis Profile Data as Table
Selecting this option allows viewing or saving hole profile data for the A or
B axis. The profile is calculated from the magnitude of the readings at each
level (see Figure 62). This report lists the profile of the casing as calculated
from the bottom of the casing upward or from the top down (see the
Options pane in Figure 60). See Appendix C for an example of a profile
report saved in text form. Tabular reports may also be saved in comma-
separated value (.csv) or “Text” (.txt) format.