7. Hold the pile fas tener fab ric away from the hel met shell. Re ferring to Fig ure 2-11,
in sert screws with lock wash ers through the backplate and the in side of the hel met
shell. At tach the spac ers and re ceiv ers to the out side of the hel met shell. En sure
that the jaw re ceiver pro jec tions point to the rear of the hel met.
8. Tighten all screws so that the jaw re ceiv ers and spac ers are firmly at tached to the
hel met.
9. Ce ment the earcup pile fas tener fab ric to the in side of the hel met shell. Cut an “X”
pat tern into the fab ric across each screw head to fa cil i tate in spec tion and tight en ing.
10. Re in stall the earcup as sem bly.
2-11
Fig ure 2-11. Bay o net Re ceiver As sem bly
SCREW
LOCKWASHER
BACKPLATE
SPACER
JAW RECEIVER
