![background image](http://html1.mh-extra.com/html/genius/ge-bin4/ge-bin4_manual_2212984035.webp)
GE-BIN4 USER’S GUIDE
GE-BIN4
Section C-35
AUGER {1-4} SETUP
SUB SCREENS
2
.2.1-4
1.
This parameter is used to set the weight measured by the auger for every minute of
activation. For every minute for which the auger is activated, the controller will
consider that the amount adjusted here is consumed. This consumption is used
mainly for the fill sequence evaluations. This parameter is adjusted in 1kg (1lb) from
1kg (1lb) to 999kg (999lb).
2.
This parameter is used to activate or deactivate the auger maximum run time alarm
monitoring. If this parameter is set to “
Yes
”, the auger maximum run time alarm
will occur when the auger has been continuously activated throughout the time
period adjusted at
MAX RUN TIME [3]
. If this parameter is set to “
No
”, no auger
maximum run time alarm will occur.
3.
This parameter is used to set the time period throughout which the auger can be
activated without triggering the alarm. If the auger is activated for more than the time
set at this parameter and the
MAX RUN TIME ALM [2]
option is set to “
Yes
”, the
alarm will be activated. This parameter can be adjusted to any value from 0:00 to
500:59 hours.
A u g e r 1 S e t u p
l b p e r m i n u t e : 5
M a x R u n T i m e A l m : Y e s
M a x R u n T i m e : 1 : 0 0
[
1
]
[
2
]
[
3
]
www.monitrol.com
Summary of Contents for GE-BIN4
