![background image](http://html1.mh-extra.com/html/genius/ge-bin4/ge-bin4_manual_2212984012.webp)
GE-BIN4 INSTALLATION
Section B-12
GE-BIN4
Connection procedure
Detailed wiring diagrams
Typical Auger Signal Wiring
Auger signal sensors (ex.: CSD-1 Current Switch Detector) should be mounted inside the
controller enclosure with the auger power wire running through the sensor loop. If a
single sensor monitors multiple auger circuit, run the wires from all auger groups the
same direction through the sensor loop.
The best use for a single auger sensor is monitoring your bin auger motor. This provides a
clear indication of all feed entering the building and it provides an alarm when the bin is
empty.
FIGURE NO. 2 Typical Auger Signal Wiring
PRB 2 PRB 3 PRB 4
PRB 1
L1
L2/N
B
L
A
C
K
R
E
D
B
L
A
C
K
R
E
D
LINE
115/230V
L1
L2/N
1246 A
GE-BIN4
X1246
www.monitrol.com
Summary of Contents for GE-BIN4
