![background image](http://html1.mh-extra.com/html/genius/ge-bin4/ge-bin4_manual_2212984014.webp)
GE-BIN4 INSTALLATION
Section B-14
GE-BIN4
Typical alarm connection wiring
The GE controller provides a normally open and normally closed dry contact to set off an
alarm if the auger runs too long or if a bin weight goes below a set limit condition occurs.
Moreover, this same contact can be used to signal a power failure or other malfunctions.
It may be connected to an alarm system or directly to a siren and/or auto-dialer.
Make the normally closed (NC) or normally open (NO) connections as indicated in
figures 4 and 5.
The relay will activate about 30 seconds after an alarm is triggered.
FIGURE NO. 4 Typical Alarm Connection Wiring
ALARM SYSTEM /
AUTO DIALER
ALARM
NC
C
NO
FIGURE NO. 5 Siren Connection Wiring
Normally closed
manual OFF switch
ALARM
NC
C
NO
www.monitrol.com
Summary of Contents for GE-BIN4
