Genius GE-BIN4, Manual, Page: 27 / 56

GE-BIN4 USER’S GUIDE
GE-BIN4 Section C-27
BIN {1-4} INFO
SUB SCREENS
1.
1-4
Some parameters may not appear if their corresponding option is not activated. To verify
these options, refer to the
BIN {1-4} SETUP (2.1.1-4)
screens.
1.
These parameters are used to access to the respective
BIN {1-4} DETAILS (1.1-
4.1)
screen.
2.
This parameter displays the current weight measured for the bin. The current weight
is the gross weight of the bin, minus the tare weight of that bin. If there is a
communication problem with the bin’s module, this parameter will display “
---
”.
This parameter is displayed to the nearest 1kg (1lb) and has a maximum display
value of 30000kg (67000lb).
3.
This parameter displays today’s consumption for the bin. If there was no
consumption recorded for today, this parameter will display “
---
”. This parameter
is displayed to the nearest 1kg (1lb) and has a maximum display value of 30000kg
(67000lb).
4.
This parameter displays the state of the auger of the bin. If there is a communication
problem with the bin’s module, this parameter will display “
---
”.
5.
This parameter displays the date at which the last fill occurred. If no fill has been
detected since the last initialization, this parameter will display “
--/--/--
”.
6.
This parameter displays the total amount that has been measured for all fills that
were done at the
LAST FILLED DATE [5]
. If no fill has been detected since the
last initialization, this parameter will display “
---
”.
B i n 1 D e t a i l s
C u r r e n t W t . : 2 0 0 0 0 k g
T o d a y ' s
C o n s u m p t i o n : 2 0 0 0 0 k g
A u g e r S t a t u s : O F F
L a s t F i l l e d : 0 3 / 0 9 / 1 1
A m o u n t : 2 0 0 0 0 k g
[
1
]
[
3
]
[
4
]
[
5
]
[
6
]
[
2
]
www.monitrol.com