GE-BIN4 INSTALLATION
GE-BIN4
Section B-11
Mounting
-
The enclosure must be mounted in a location that will allow the cover to be
completely opened.
-
Fasten the four brackets to the four mounting holes on the back of the enclosure using
the four screws provided with the brackets.
-
Then mount the enclosure on the wall by inserting screws through the brackets’
adjustment slots, into the wall. Make sure to position the enclosure so that all wires
extend out of the bottom section of the enclosure.
-
The bracket slots serve to adjust the position of the controller.
-
Once you have adjusted the controller position, tighten the four mounting screws. (see
figure 1).
FIGURE NO. 1 Mounting Position and Devices
www.monitrol.com
Summary of Contents for GE-BIN4
