Genie Z-45/22, Service Manual

Page: 4 / 205

Genie Z-45/22 Part No. 29487
Service Manual - First Edition
SAFETY RULES
iv
Section 1 - Safety Rules
Workplace Safety
Be sure to keep sparks, flames and
lighted tobacco away from flammable and
combustible materials like battery gases
and engine fuels. Always have an approved fire
extinguisher within easy reach.
Be sure that all tools and working areas
are properly maintained and ready for
use. Keep work surfaces clean and free
of debris that could get into machine components
and cause damage.
Be sure that your workshop or work area
is well ventilated and safely and
adequately illuminated.
Be sure any forklift, overhead crane or
other lifting or supporting device is fully
capable of supporting and stabilizing the
weight to be lifted. Use only chains or straps that
are in good condition and of ample capacity.
Be sure that fasteners intended for one
time use (i.e., cotter pins and self-locking
nuts) are not reused. These components
may fail if they are used a second time.
Be sure to properly dispose of old oil or
other fluids. Use an approved container.
Please be mindful of the environment.
Personal Safety
Any person working on or around a machine must
be aware of all known safety hazards. Personal
safety and the continued safe operation of the
machine should be your number one priority.
Read each procedure thoroughly. This
manual and the decals, on the machine,
use signal words to identify the following:
Indicates the presence of
a hazard that will cause
death or serious injury.
Indicates the presence of
a hazard that may cause
death or serious injury.
Indicates the presence of
a hazard that will or may
cause serious injury or
damage to the machine.
Indicates special
operation or maintenance
information.
Be sure to wear protective eye wear and
other protective clothing if the situation
warrants it.
Be aware of potential crushing hazards
such as moving parts, free swinging or
unsecured components, and lifting or
placing loads. Always wear approved steel-toed
shoes.