Genie Z-45/22, Service Manual

Page: 138 / 205

Part No. 29487 Genie Z-45/22 7 - 1
Service Manual - First Edition Section 7 - Repair Procedures
Repair Procedures
About This Section
Most of the procedures in this section should only
be performed by a trained service professional in a
suitably equipped workshop. Select the
appropriate repair procedure after troubleshooting
the problem.
Perform disassembly procedures to the point
where repairs can be completed. Then to re-
assemble, perform the disassembly steps in
reverse order.
General Repair Process
Symbols Legend
Indicates the presence of a
hazard that will cause death or
serious injury.
Indicates the presence of a
hazard that may cause death or
serious injury.
Indicates the presence of a
hazard that will or may cause
serious injury or damage to the
machine.
Indicates special operation or
maintenance information.
Indicates that a specific result is expected after
performing a series of steps.
Observe and Obey:
Repair procedures shall be completed by a
person trained and qualified on the repair of
this machine.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating the machine.
Before Repairs Start:
Read, understand and obey the safety rules
and operating instructions printed in the Genie
Z-45/22 Operating Instruction Manual.
Be sure that all necessary tools and parts are
available and ready for use.
Read each procedure thoroughly. Attempting
shortcuts may produce hazardous conditions.
Malfunction
discovered
Identify
symptoms
Troubleshoot
Perform
repair
Return to
service
problem
solved
problem
still exists
Inspect
and test