USER MANUAL
GWR-I Cellular Router Series
97
IPSec Tunnel configuration between GWR-I Router and Cisco Router
IPSec tunnel is a type of a VPN tunnels with a secure tunneling method. Diagram below illustrates
simple network with GWR-I Router and Cisco Router. Idea is to create IPSec tunnel for LAN to LAN (site to
site) connectivity.
Figure 84 - IPSec tunnel between GWR-I Router and Cisco Router
The GWR-I Routers requirements:
•
Static IP WAN address for tunnel source and tunnel destination address
•
Dynamic IP WAN address must be mapped to hostname with DynDNS service (for
synchronization with DynDNS server SIM card must have internet access)
GSM/UMTS APN Type:
For GSM/UMTS networks GWR-I Router connections may require a Custom
APN. A Custom APN allows for various IP addressing options, particularly static IP addresses, which are
needed for most VPN connections. A custom APN should also support mobile terminated data that may be
required in most site-to-site VPNs.
The GWR-I Router configuration:
•
Click
Network
Tab, to open the
LAN NETWORK
screen. Use this screen to configure LAN TCP/IP
settings. Configure IP address and Netmask.
-
IP Address: 192.168.10.1
-
Subnet Mask: 255.255.255.0
Press
Save
to accept the changes.
Figure 85 - Network configuration page for GWR-I Router
Summary of Contents for GWR-I series
Page 16: ...USER MANUAL GWR I Cellular Router Series 16 Declaration of conformity...
Page 20: ...USER MANUAL GWR I Cellular Router Series 20 Figure 8 WAN Information...
Page 23: ...USER MANUAL GWR I Cellular Router Series 23 Figure 10 DHCP Server configuration page...
Page 112: ...USER MANUAL GWR I Cellular Router Series 112 Figure 106 Policies from trust to untrust zone...
