USER MANUAL
GWR-I Cellular Router Series
60
Settings - SMS
SMS remote control feature allows users to execute a short list of predefined commands by sending SMS
messages to the router. GWR-I router series implement following predefined commands:
1.
In order to establish PPP connection, user should send SMS containing following string
:PPP-CONNECT
After the command is executed, router sends a confirmation SMS with “OK” if the command is
executed without errors or “ERROR” if something went wrong during the execution of the
command.
2.
In order to disconnect the router from PPP, user should send SMS containing following string
:PPP-DISCONNECT
After the command is executed, router sends a confirmation SMS with “OK” if the command is
executed without errors or “ERROR” if something went wrong during the execution of the
command.
3.
In order to reestablish (reconnect the router) the PPP connection, user should send SMS containing
following string
:PPP-RECONNECT
After the command is executed, router sends a confirmation SMS with “OK” if the command is
executed without errors or “ERROR” if something went wrong during the execution of the
command.
4.
In order to obtain the current router status, user should send SMS containing following string
:PPP-STATUS
After the command is executed, router sends one of the following status reports to the user:
-
CONNECTING
-
CONNECTED, WAN_IP: {
WAN IP address or the router
}
-
DISCONNECTING
-
DISCONNECTED
Remote control configuration page is presented on the following figure. In order to use this feature,
user must enable the SMS remote control and specify the list of SIM card numbers that will be used for SMS
remote control. The SIM card number should be entered in the following format: {Country Code}{Mobile
Operator Prefix}{Phone Number} (for example
+38164111222
).
As presented on the Figure 31. configuration should be performed for separately for both SIM cards.
After the configuration is entered, user must click on SAVE button in order to save the configuration.
Figure 31– SMS remote control configuration
Summary of Contents for GWR-I series
Page 16: ...USER MANUAL GWR I Cellular Router Series 16 Declaration of conformity...
Page 20: ...USER MANUAL GWR I Cellular Router Series 20 Figure 8 WAN Information...
Page 23: ...USER MANUAL GWR I Cellular Router Series 23 Figure 10 DHCP Server configuration page...
Page 112: ...USER MANUAL GWR I Cellular Router Series 112 Figure 106 Policies from trust to untrust zone...
