Geneko GWR-I series, User Manual

Page: 12 / 113

USER MANUAL GWR-I Cellular Router Series
12
Product Overview
Front panel
On the front panel ( Figure 2 ) the following connectors are located:
•
one RJ45 connector – Ethernet port for connection into local computer network;
•
one RJ45 connector for RS232 serial communication;
•
one DB9 connector for RS232/422/485 serial communication;
•
reset button;
Ethernet connector LED:
•
ACT (yellow) on – Network traffic detected (off when no traffic detected).
•
Network Link (green LED) on - Ethernet activity or access point engaged.
LED Indicator Description:
1. Reset (red LED) on – the GWR-I Router reset state.
2. Power status (green LED) on – Power supply. Power status LED will blink when the GWR Router is
in initializing state.
3. Link (red LED) will blink when connection is active.
4. Signal strength LED indicator:
•
–107 to –98 dBm = Weak (LED I)
•
–98 to –80 dBm = Moderate (LED II)
•
–80 or better dBm = Excellent (LED III).
•
0 is not known or not detectable (running LED)
Signal strength LED will blink when GPRS/EDGE/HSPA/HSPA+/LTE connection is not active. When
connection is active Signal strength LED is on. Reset condition will be indicated by blinks of the first and
last Signal strength LED. When signal quality is not known or not detectable there will be running LED
indication.