Geneko GWR-I series, User Manual

Page: 103 / 113

USER MANUAL GWR-I Cellular Router Series
103
•
Click VPN Settings > IPSEC to configure IPSEC tunnel parameters. Click Add New Tunnel button to
create new IPSec tunnel. Tunnel parameters are:
•
Add New Tunnel
-
Tunnel Name: test
- Enable: true
•
Local Group Setup
-
Local Security Gateway Type: IP Only
- IP Address: 172.30.147.96
-
Local ID Type: Custom
- Custom Peer ID: 172.30.147.96
-
Local Security Group Type: Subnet
- IP Address: 192.168.10.0
-
Subnet Mask: 255.255.255.0
•
Remote Group Setup
- Remote Security Gateway Type: IP Only
-
IP Address: 150.160.170.1
-
Remote ID Type: Custom
- Custom Peer ID: 150.160.170.1
-
Remote Security Group Type: IP
- IP Address: 10.10.10.0
-
Subnet Mask: 255.255.255.0
•
IPSec Setup
- Keying Mode: IKE with Preshared key
-
Phase 1 DH group: Group 2
- Phase 1 Encryption: 3DES
-
Phase 1 Authentication: SHA1
- Phase 1 SA Life Time: 28800
-
Perfect Forward Secrecy: true
- Phase 2 DH group: Group 2
-
Phase 2 Encryption: 3DES
- Phase 2 Authentication: SHA1
- Phase 2 SA Life Time: 3600
-
Preshared Key: 1234567890
•
Advanced
- Aggressive Mode: true
-
Compress(Support IP Payload Compression Protocol(IPComp)): false
- Dead Peer Detection(DPD): false
-
NAT Traversal: true
- Press Save to accept the changes.