Geneko GWR-I series, User Manual

Page: 100 / 113

USER MANUAL GWR-I Cellular Router Series
100
-
Click Start button on Internet Protocol Security page to initiate IPSEC tunnel
Figure 89 – IPSec start/stop page for GWR-I Router
•
On the device connected on GWR-I router setup default gateway 192.168.10.1.
The Cisco Router configuration:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname
Cisco-Router
!
boot-start-marker
boot-end-marker
!
username admin password 7 ****************
!
enable secret 5 *********************
!
no aaa new-model
!
no ip domain lookup
!
!--- Keyring that defines wildcard pre-shared key.
!
crypto keyring remote
pre-shared-key address 0.0.0.0 0.0.0.0 key 1234567890
!
!--- ISAKMP policy
!
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
lifetime 28800
!
!--- Profile for LAN-to-LAN connection, that references
!--- the wildcard pre-shared key and a wildcard identity
!
crypto isakmp profile L2L
description LAN to LAN vpn connection
keyring
remote
match identity address 0.0.0.0
!
!
crypto ipsec transform-set testGWR esp-3des esp-sha-hmac
!
!--- Instances of the dynamic crypto map
!--- reference previous IPsec profile.
!
crypto dynamic-map dynGWR 5
set transform-set testGWR
set isakmp-profile L2L
!
!--- Crypto-map only references instances of the previous dynamic crypto map.
!