Geneko GWR-I series, User Manual

Page: 68 / 113

USER MANUAL GWR-I Cellular Router Series
68
Management – Command Line Interface
CLI (command line interface) is a user text-only interface to a computer's operating system or an
application in which the user responds to a visual prompt by typing in a command on a specified line and
then receives a response back from the system.
In other words, it is a method of instructing a computer to perform a given task by "entering" a command.
The system waits for the user to conclude the submitting of the text command by pressing the "Enter" or
"Return" key. A command-line interpreter then receives, parses, and executes the requested user command.
On router's Web interface, in Management menu, click on Command Line Interface tab to open the
Command Line Interface settings screen. Use this screen to configure CLI parameters (Figure 42).
Command Line Interface
Label Description
CLI Settings
Enable Enable or disable CLI
CLI on Telnet, SSH, Serial
View Mode Username Login name for View mode
View Mode Password Password for View mode
Confirm Password
Confirm password for View mode
View Mode Timeout
Inactivity timeout for View mode in seconds. After timeout, user will be put in
Main mode.
Edit Mode Timeout
Inactivity timeout for Edit mode in seconds. Note that Username and Password
for Edit mode are the same as Web interface login parameters. After timeout,
user will be put in Main mode.
Console Type Windows, other.
Save Click Save to save your changes back to the GWR-I Router.
Reload Click Reload to discard any changes and reload previous settings.
Table 24 – Command Line Interface parameters
Figure 42 – Command Line Interface
Detailed instructions related to CLI are located in other document (Command_Line_Interface.pdf file on CD
that goes with the router). You will find detailed specifications of all commands you can use to configure the
router and monitor routers performance.