Geneko GWR-I series, User Manual

Page: 69 / 113

USER MANUAL GWR-I Cellular Router Series
69
Management – Remote Management
Remote Management Utility is a standalone Windows application with many useful options for
configuration and monitoring of GWR-I routers. More information about this utility can be found in other
document (Remote_Management.pdf). In order to use this utility user has to enable Remote Management on
the router (Figure 43).
Figure 43 – Remote Management
Command Line Interface
Label Description
Enable Remote
Management
Enable or disable Remote Management.
Protocol Choose between Geneko and Sarian protocol.
Bind to Specify the interface.
TCP port Specify the TCP port.
Username
Specify the username.
Password
Specify the password.
Save Click Save to save your changes back to the GWR-I Router.
Reload Click Reload to discard any changes and reload previous settings.
Table 25 – Remote Management parameters
Management – Connection Manager
Enabling Connection Manager will allow Connection Wizard (located on setup CD that goes with
the router) to guide you step-by-step through the process of device detection on the network and setup of
the PC-to-device communication. Thanks to this utility user can simply connect the router to the local
network without previous setup of the router. Connection Wizard will detect the device and allow you to
configure some basic functions of the router. Connection Manager is enabled by default on the router and if
you do not want to use it you can simply disable it (Figure 44).