Geneko GWR-I series, User Manual

Page: 18 / 113

USER MANUAL GWR-I Cellular Router Series
18
NOTE
Add/Remove/Update manipulation in tables
To
Add a new row (new rule or new parameter) in the table please do following:
•
Enter data in fields at the bottom row of the table (separated with a line).
•
After entering data in all fields click Add link.
To Update the row in the table:
•
Change data directly in fields you want to change
To
Remove the row from the table:
•
Click Remove link to remove selected row from the table.
Save/Reload changes
To save all the changes in the form press Save button. By clicking Save data are checked for validity. If they are not
valid, error message will be displayed. To discard changes press the Reload button. By clicking Reload , previous
settings will be loaded in the form.
Status Information
The GWR-I Router’s Status menu provides general information about router as well as real-time
network information. Status information is divided into following categories:
General Information,
Network Information (LAN),
WAN Information.
Status - General
General Information Tab provides general information about device type, device firmware version,
kernel version, CPU vendor, Up Time since last reboot, hardware resources utilization and MAC address of
LAN port. Screenshot of General Router information is shown at
Figure 6 . Data in Status menu are read only
and cannot be changed by user. If you want to refresh screen data press Refresh button .
SIM Card detection is performed only at time booting the system, and you can see the status of SIM
slot by checking the Enable SIM Card Detection option.