Geneko GWR-I series, User Manual

Page: 34 / 113

USER MANUAL GWR-I Cellular Router Series
34
the tunnel endpoint is down. Enter a number from 1 to 10 times.
Add Click Add to insert (add) new item in table to the GWR-I Router.
Remove
Click Remove to delete selected item from table.
Reload Click Reload to discard any changes and reload previous settings.
Save Click Save to save your changes back to the GWR-I Router.
Table 9 – GRE parameters
Figure 14 – GRE tunnel parameters configuration page
GRE Keepalive
GRE tunnels can use periodic status messages, known as keepalives, to verify the integrity of the
tunnel from end to end. By default, GRE tunnel keepalives are disabled. Use the keepalive check box to
enable this feature. Keepalives do not have to be configured on both ends of the tunnel in order to work; a
tunnel is not aware of incoming keepalive packets. You should define the time interval (in seconds) between
transmitted keepalive packets. Enter a number from 1 to 60 seconds, and the number of times to retry after
failed keepalives before determining that the tunnel endpoint is down. Enter a number from 1 to 10 times.