GEA DairyRobot R9500 Operation Manual Download Page 24

Page: 24 / 100

Transport

Information on disposing of packing material

7821-9001-005

01. October 2019

24 / 100

4.3

Delivery

Check the goods supplied against the packing list enclosed for completeness and
damage.

Legend:

1 Milk sampling device
2 Sample tank unit
3 Operating manual with installation instructions

4 Bottle rack to hold up to 80 sample bottles

(Option)

4.4

Storage conditions

It is recommended that the device is stored in a dry, dust-free and frost-free
environment.

Please note!

The sampling device should be kept clean to extend its service life.

4.5

Information on disposing of packing material

After unpacking, the packing material must be handled properly and disposed of
carefully in accordance with the valid local regulations on waste disposal and
utilization.

Summary of Contents for DairyRobot R9500





































































































Search results

Summary of Contents for DairyRobot R9500

Reviews:

Related manuals for DairyRobot R9500

Brands by name

Popular brands

GEA DairyRobot R9500, Operation Manual

Search results

Summary of Contents for DairyRobot R9500

Reviews:

Related manuals for DairyRobot R9500

Brands by name

Popular brands