Sampling device
Interrupt sampling
7821-9001-005
01. October 2019
5.6
Take samples
Please note!
Carry out a system clean before starting sampling so that the milk-carrying
parts of the installation can be cleaned once again.
For information on this subject see the section entitled ”Cleaning”
5.6.1
Start automatic operation
Start sampling
● Open the menu item ”Unlock box”+++
UNLOCK BOX+++
Please note!
● If a cow produces less than 2 kg of milk (e.g. if the cluster is
inadvertently removed), the data is not recorded and a sample is not
taken.
● If the teat cups are being attached manually during sampling, wait for
at least one minute after the cow has left the box before attaching the
cluster to the next cow.
The sampling cycle does not start until the cluster has been removed
and takes about one minute.
● A message is generated when all of the sample bottles in the sampling
device have been filled.
5.6.2
Note the box data
Note the following data so that the data export can be checked:
● Sampling start time
● ID of the first cow in each box
5.7
Interrupt sampling
To change a bottle rack, sampling must be interrupted for the corresponding milking
box.
5.7.1
Stop automatic operation
● Open the menu item ”Lock box”+++
LOCK BOX+++
Note
The system waits until a wash or milking process that
is still in progress ends before the milking box is
blocked. This can be seen from the graphic
animation on the button.
LOCK BOX+++
5.7.2
Change the bottle rack
● Change bottle rack
