Safety
The owner of this product must ensure compliance with the following requirements
7821-9001-005
01. October 2019
2
Safety
2.1
The owner of this product must ensure compliance with the following requirements
The product has been designed and constructed taking account of a potential risk
analysis and after careful selection of the compliant harmonized standards and
other technical specifications. It therefore ensures a maximum level of safety.
This safety can only be achieved in practice on the farm however when all of the
necessary measures have been taken. It is part of the farmer's obligation of care
to plan these measures and check that they are carried out.
The owner must ensure the following:
● Anyone performing work or activities relating to this product must carefully reads
the instructions (especially the safety instructions and warnings) and signs to
confirm that they have understood them and will act in accordingly!
● The manual must always be available, in a legible and complete condition, at
the place where the product is used.
● All persons who carry out work on the product must be able to consult the
manual at any time.
● The instructions given in the section on ”Basic Safety Instructions” must be
followed.
● The legal requirements are observed.
● Operating instructions must be developed for and specially adapted to the
conditions of the farm to take account of all aspects of safety.
● The product may only be used for its intended purpose.
● The product may only be used if it is in perfect working condition. The safety
devices especially must be checked regularly to ensure they are working.
● The computer and the software installed on it must be installed and operated
in accordance with the specifications.
● A working data backup system must be available.
Only use computers which are in perfect working condition.
● Work should only be carried out by suitably qualified persons.
● The personnel is regularly instructed in all relevant matters of safety at work and
protection of the environment and is familiar with the manual, particularly the
safety instructions it contains.
● To start with, operating personnel who require training may only operate the
equipment under the supervision of an experienced person. Their successful
completion of training is to be confirmed in writing.
● Safety signs, plates and decals, which are attached to the product, must be
replaced immediately if they become illegible or lost!
● Unauthorized persons (e.g. children) are not allowed in hazardous areas and
should not have access to cleaning agents or disinfectants.
