Sampling device
Safety instructions for sampling
7821-9001-005
01. October 2019
5
Sampling device
5.1
Special personnel qualification required for sampling
Sampling may only be carried out by specially qualified personnel in accordance
with the safety instructions.
Excellent knowledge of working with the automatic milking system and MView user
interface is needed to carry out sampling.
See also the section on ”Personnel qualification”.
5.2
Safety instructions for sampling
To prevent damage to property and/or life-threatening injury to personnel, the
following must always be observed:
● Use the product for its intended purpose only.
● Taking the wrong action when there is a fault may cause damage - so familiarize
yourself with the instructions on what to do if there is a fault.
Read the ”Safety” section as well.
Special risks involved in sampling:
● Incorrect use may lead to serious damage to property and/or life-threatening
injury to people.
Before taking samples, ensure you are familiar with:
● the operating and control elements,
● The equipment included
● The method of operation
● The immediate surroundings
Carry out the following checks before every start:
● Check and make sure that all media are suitable, connected and present.
● Check the product for any visible damage; immediately repair the fault found
(noting the personnel qualification required) or contact the specialist dealer - the
product may only be used if it is in perfect condition.
● Check and make sure that there are no objects or materials in the working area
if they are not necessary for operation.
During sampling:
● No safety equipment may be removed or taken out of operation during
sampling.
● Operating personnel should make sure that no unauthorized personnel are in
the working area.
