Sampling device
Displaying information about the current sampling process
7821-9001-005
01. October 2019
5.8.6
Disconnect and remove the sampling device
Note
The red suction hose should be disconnected from the lid of the sample tank
at the end of the system clean and placed in a vessel containing hot water.
The pump in the sampling case should then be run manually for about 1
minute. In this way, residual milk is flushed from the suction hose.
Once the system clean has ended, the sampling devices must be removed from all
of the boxes.
● Carry out the steps described for setting up and connecting the device, but in
reverse order.
Note
The sample tank unit remains with the sampling device.
It is used to carry out measurements on that sampling device.
To extend its service life, the sampling device should be kept clean and it
should be stored in a dry place at room temperature.
5.8.7
Resume automatic operation
● Open the menu item ”Unlock box”+++
UNLOCK BOX
● Switch entry gates to all milking boxes to automatic mode.
5.9
Displaying information about the current sampling process
The Info button (i) can be used to display
additional information about the actual
sampling.
The following information is displayed:
● The number of samples taken from each animal
● Whether an animal is excluded from the sampling process (orange border)
● Whether an additional sample should be taken from a particular animal (white
border)
