GE XDP-H2, User Manual

Page: 54 / 96

Setup and Calibration 4-25
January 2008
Viewing and Clearing the
Cal Drift (cont.)
Note:
The “Manual Cal” menu option also appears on the above list.
Press
[ESC]
as many times as necessary to return to normal
RUN
mode,
or proceed to the appropriate section of this chapter to continue
programming the XDP.
Range Cal Use the [
S
] and [
T
] keys to
select
[View Cal Drift]
and press
[ENTER]
.
View-Cal-Drift
Clear-Cal-Drift
View-Cal-Drift Both the zero and span drift
values, in mA, are shown.
Press the
[ENTER]
key when
you are ready to continue.
Zero Drift x.xx
Span Drift x.xx
OK
Range Cal Use the [
S
] and [
T
] keys to
select
[Clear Cal Drift]
and press
[ENTER]
.
View-Cal-Drift
Clear-Cal-Drift
Clear-Cal-Drift Use [
W
] and [
X
] highlight the
desired answer (YES or NO)
to the question shown. Then,
press the
[ENTER]
key.
Clear Drift? Warning
Data Will Be Reset!
YES NO
Range Cal Press
[ESC]
to return to the Cal
Menu .
View-Cal-Drift
Clear-Cal-Drift