GE XDP-H2, User Manual

Page: 31 / 96

January 2008
4-2 Setup and Calibration
Selecting the Active
Curve
At times it will be desirable to view a curve other than H2/Air. For
example, during the first stage of a shutdown, it will be necessary to
view the H2/CO2 curve. To select the XDP active curve, access the
User Program as described on page 3-4, and proceed as follows:
Press
[ESC]
as many times as necessary to return to normal
RUN
mode,
or proceed to the appropriate section of this chapter to continue
programming the XDP.
Cal Opt Disp Use the [
W
] and [
X
] keys to
select
[Cal]
and press
[ENTER]
.
Cal Opt Disp Press
[ENTER]
.
1:Cal
Range Cal If necessary, use the [
W
] and
[
X
] keys to select
[Range]
and
press
[ENTER]
.
Slct Cal Menu Item
Range Cal Press
[ENTER]
.
Select-Active-Curve
Select-Active-Curve Use the [
S
] and [
T
] keys to
select the desired gas mixture
to be monitored and press
[ENTER]
. [H2/AIR is used as an
example in this manual.]
H2/AIR
H2/CO2
AIR/CO2
Range Cal Press
[ESC]
three times to
return to the main menu.
Select-Active-Curve