GE XDP-H2, User Manual

Page: 38 / 96

Setup and Calibration 4-9
January 2008
Setting Up the System
Analog Output (cont.)
•
Span Trim: adjust the system analog output to equal the high end
of the recorder range minus the zero setpoint.
Proceed to the appropriate sub-section to program the desired system
analog output feature.
Choosing the System
Analog Output Type
Enter the system analog output menu, as described on page 4-8, and
proceed as follows:
Note:
The Test , Zero Trim , and Span Trim options are also available
in the above list box.
Note:
The “Namur” option is also available in the above list box.
The Namur NE43 specification requires a 4-20 mA output to
be clamped in specific bands to indicate out-of-range errors.
Either press
[ESC]
until you return the User Menu or proceed to the
appropriate section to continue setting up the system analog output.
User Aout Use the [
S
] and [
T
] keys to
select
[Aout Type]
, and press
[ENTER]
.
Aout Type
Zero Setpoint
Span Setpoint
User Aout Aout-Type Use the [
S
] and [
T
] keys to
select the desired system ana-
log output type, and press
[ENTER]
.
0-20mA
4-20mA
0-2V
User Aout You are now back at the sys-
tem analog output setup menu.
Aout Type
Zero Setpoint
Span Setpoint