GE PACSystems RX7i, User Manual

Page: 50 / 276

Chapter 4. Configuration
GFK-2224Q January 2017 37
If you have no network administrator and are using a simple
isolated network
with no gateways, you can use
the following range of values for the assignment of local IP addresses:
10.0.0.1 First Ethernet interface
10.0.0.2 Second Ethernet interface
10.0.0.3 Third Ethernet interface
. .
. .
. .
10.0.0.255 Programmer TCP or host
Also, in this case, set the subnet mask to 255.0.0.0 and the gateway IP address to 0.0.0.0.
Note: If the isolated network is connected to another network, the IP addresses 10.0.0.1 through 10.0.0.255
must not be used; and the subnet mask and gateway IP address must be assigned by the network
administrator. The IP addresses must be assigned so that they are compatible with the connected
network.
Subnet Mask: Key in the desired mask in the format indicated. Learn more about subnet mask usage at Subnet
Addressing and Subnet Masks on page 246.
Gateway IP Address: Key in the desired Gateway IP Address in the format indicated. Learn more about
Gateways on page 245.
Network Time Sync: Options are “None” and “SNTP”. Select SNTP (Simple Network Time Protocol) if the CPU will
be synchronized to the network clock.
SNTP PME configuration for the CPE305/CPE310/CPE330/CPE400 CPU settings