GE Optima CT670, Installation Manual

Page: 154 / 206

GE C
OMPANY
D
IRECTION
5472001-1EN, R
EVISION
6 O
PTIMA
CT680 S
ERIES AND
O
PTIMA
CT670 I
NSTALLATION
M
ANUAL
Page 154 Section 3.0 - Table Cover Installation (GT1700V)
3.2.3 Top Panel #2
1.) Install two (2) 4mm hex-head screws. Leave them loose until the bottom screws are installed.
2.) Install 6nd wire using one (1) 4mm hex-head screw.
3.2.4 Bottom Panel #2
1.) Insert white washer between grey base and panel. Insert Phillips screw into the bushing.
2.) Tighten Phillips screws. Tighten top screws.
3.3 Re-install Side Panel
1.) Install with two (2) Phillips screws. Reconnect cable.
3.4 Table Side Covers Install
1.) With the side covers toward table front, align the tabs on the cover with the slots on the table.
2.) Slide the cover toward the table until it stops.
3.) Slide the cover toward the back of the table to lock the cover in place.
4.) Install the two (2) 4mm hex-head screws on each end to secure cover. (1700 Table: Install one
(1) screw.)
3.5 Table Side Covers Removal
1.) Remove the two (2) 4mm hex-head screws that secure the side cover. (1700 Table: Remove
one (1) screw)
2.) Slide the cover toward the gantry until the locking tabs disengage and the cover is free.
3.) Pull the cover away from the table to remove.
4.) Store in a safe place.