MapSight User Manual
Page 79
www.gemapsight.com/support
MS-101-14-12-34.0
Equipment warnings
WARNING!
To
reduce the risk of personal injury, electrical shock, fire or damage to the
equipment:
•
Plug the wall charger into an electrical outlet that is easily accessible at all times.
•
Disconnect power from the equipment by unplugging the wall charger from the electrical
outlet or unplugging the synchronization cable from the host computer.
•
Do not place anything on the wall charger cord or any of the other cables. Arrange them so
that no one may accidentally step on or trip over them.
•
Do not pull on a cord or cable. When unplugging the wall charger from the electrical outlet,
pull on the plug, not the cord.
Use only wall chargers intended for your MapSight. Using any other external power source can
damage your product and void your warranty.
Using your MapSight in extreme temperatures
MapSight operates in ranges from -22°F to 122°F (-30°C to 50°C). To help your device function
properly, store the device indoors when possible.
Other tips:
•
If your MapSight is exposed to temperatures below 14°F (-10°C), the device may slow down
or the display backlight may become dim to reduce the load on the battery power.
•
Extremely low or high temperatures may prevent the battery pack from charging. Charge
the battery pack in temperatures between 32°F and 104°F (0° C and 40° C). For best results,
charge the battery pack at room temperature (68°F or 20°C)
Cleaning your MapSight
This section explains how to clean
•
the touchscreen
•
the communications module (area housing the USB port, DC jack, and serial port)
•
the speaker or microphone
•
the display bezel
•
data capture module
Touchscreen:
To clean the touchscreen, follow these steps:
1.
Press the power button briefly to suspend the device.
2.
If you applied a protector to the touchscreen, carefully remove it.
3.
Apply water or a mild cleaning solution such as
Windex
®
or
409
®
to a microfiber cloth and
gently wipe off the touchscreen. Other approved cleaners include
Citrus Wonder
®
and
Citrus
All Purpose Cleaner
®
.
CAUTION:
Do not use tissues, paper towels, or harsh cleaning agents to clean the
touchscreen.
1.
If you used a cleaning solution, rinse the touchscreen with water and dry it with a
microfiber cloth.
2.
Press the power button to resume the device.
CAUTION:
Long exposure to the following solutions may damage your device:
•
pine oil
•
oil based paint
