MapSight User Manual
Page 15
www.gemapsight.com/support
MS-101-14-12-34.0
On the ‘Battery’ tab, the charge status of the battery is indicated as
follows:
•
The charge bar (0 to 100) indicates the level of charge. The closer to
100 the fuller the charge
•
The ‘mAH consumed:’ value indicates how much capacity is still to be
charged. The lower the number the fuller the charge.
The red power/charge LED will blink if the unit is charging.
If the power/charge LED stop blinking this indicates that the charge level
is around 98%.
The ‘mAH consumed:’ value may slowly decrease as the battery capacity
is calibrated for optimal use.
Once the charge indicator (red LED) stops blinking and the ‘mAH
consumed:’ value stops decreasing then the battery has been fully
charged.
For fully-charged new batteries the ‘mAH consumed:’ value will be near
zero. For older batteries the ‘mAH consumed:’ may be above zero due to
natural charge/discharge cycle capacity degradation.
Press and hold the power button until the ‘Power Button’ options appear,
and then tap the [Reset] option. Resetting the MapSight unit will reset the
battery capacity
