MapSight User Manual
Page 131
www.gemapsight.com/support
MS-101-14-12-34.0
3.
Tap
N e w O u t g o i n g P o r t ,
the first option.
4.
The
Add a
Device
screen appears. Tap on the name of the
device you want to set up as an outgoing port, as shown in the
following image.
5.
Select a numbered COM port from the list of ports that appear.
If the port cannot be created, it is in use. Select a different
numbered port.
6.
Important:
Deselect the
Secure Connection
option below the list of COM ports, as shown
above. Deselecting this option ensures that the device disconnects its Bluetooth
connection only when you tell it to
7.
Tap
Finish
Once the virtual COM port is assigned using the outgoing Bluetooth COM port, specify the COM
port assignment within your application as explained in the user documentation for the
application. An example follows.
