GE MAC 1600, Operator'S Manual

Page: 35 / 162

Equipment Overview
2028451-182B MAC™ 1600 2-11
„
GE model T2000 treadmill
„
Trackmaster TMX425
„
Ergoline 900 ergometer (Sphygmomanometer in ergometer)
„
eBike ergometer
„
Variobike ergometer
„
Excalibur ergometer
„
Master’s Step (acoustic signal only)
NOTE
Set up the MAC 1600 system before using external devices. See
“Basic Setup” on page 9-2 for information about setting up stress test
devices.
Turning on the System
Press the Power button to power on the system. Verify the MAC 1600
welcome screen appears with no errors:
If you encounter any problems powering on the system, refer to
Appendix A for troubleshooting instructions.
Configuring the Device
When the device is ready for operation, configure the system settings
using the information in Chapter 9.
If the same settings will be applied to multiple devices at the site, export
the settings to an SD card and use that card to import the settings to
other MAC 1600 systems.
Testing the Device
After the MAC 1600 unit has been set up and configured, test the device
completely before using it with patients. Test scenarios include:
„
Conducting and printing a resting ECG
Refer to Chapter 5 for instructions on resting ECGs.
„
Conducting and printing an arrhythmia ECG
Refer to Chapter 6 for instructions on arrhythmia ECGs.
„
Conducting and printing a stress ECG
Refer to Chapter 7 for instructions on stress ECGs.
„
Saving, importing, printing, deleting, transmitting, and exporting
records
Refer to Chapter 8 for instructions on using internal storage.